Trio Panel (from 0.37 – 5.6 kW)

R5,774.00

Complete 400VAC Three Phase Motor Protection and Starter for up to 5.6 kW motors

Additional Optimizer cost: R 863.00

Description

The power used by a working system varies with the application but must stay within safe limits. Power consumption outside of this range indicates a faulty motor or system.

The load or power consumption is measured at the input to the motor. When the calibration button is pressed, with the jumper in place, the MOTORSCOPE defines the safe range for the system. The motor must, at that time, run under normal working conditions. The power supply has to be correct and stable, this is checked continuously. The MOTORSCOPE keeps the motor running as long as the safe limits are not exceeded.

The MOTORSCOPE has a RS232 output for serial communication with our OPTIMIZER or a PC. The OPTIMIZER is used to improve settings, as an installation aid and for more detailed fault indication. The OPTIMIZER can carry the data of the last 43 motor stops to be transferred to a PC.

Additional information

Protection

Over-load (e.g. pump jammed)
Under-load (e.g. run-dry)
Over-Voltage
Under-Voltage
Phase Failure (e.g. a wire is cut)
Phase sequence changes (e.g. after a power failure, the phases are swapped)
Phase Imbalance (e.g. one of the phases carries more load than the other two)
Not against lightning

Features

RECOVERY TIMER: The Uno Panel has a Recovery Timer to allow a bore-hole to fill up before a restart attempt is made (after a run-dry condition).
This timer is manually adjustable from 4 minutes to 16 hours.

AUXILIARY INHIBIT: The Uno Panel has an Auxiliary Inhibit input which stops the motor when the circuit between AUX and COM is OPEN.

REAL-TIME CLOCK: The Uno Panel has a real-time clock. This allows the unit to store the date and time (year, month, day, hour, minute) of each one of the last 43 trips.

Technical Specifications

Motor Voltage:
L1→L2→L3=400V
Current Range: 1→15 Amp
Power Range: 0.37→5.6 kW
Frequency Range: 40→70 Hz
Consumption: 3 VA
Cos Phi Range: 0→1 Inductive
Temp Range: -15→+70°C
Weight: ± 1.5 kg
Dimensions: 158 x 238 x 100 mm

Optional Extras

Built-in Optimizer: The built-in optimizer has a 32 character LCD screen and enables one to see and adjust all parameters of the unit.

Mobi Board: The Mobi Board acts as a serial to Bluetooth interface converter to enable a user to conveniently adjust parameters and view trip logs via our mobile app.

Fault Output Relay: The fault output relay may be used to power a 230V load (up to 8A), for example a siren, an emergency light, etc.

Reviews

There are no reviews yet.

Be the first to review “Trio Panel (from 0.37 – 5.6 kW)”

Your email address will not be published. Required fields are marked *